MOIPU 310EFI ENERGY HEAD

Upgrade your forwarder to ​a multipurpose machine

​When you install Moipu 310EFI energy head to your forwarder, you upgrade it to a multipurpose machine. You can then use your machine to handle small thinnings, trim roadsides and edges of fields.
​
​Moipu 310EFI energy head allows you to cut down, accumulate and load trees. Vertical pruning is also possible. The head is suitable for almost all forwarders. Increase operating hours and productivity for your machine with Moipu 310EFI energy head.

see also our other heads

​The Moipu 310EFI energy wood head is designed for professional and continuous use. It is relatively lightweight (460 kg) yet durable and robust with low operating costs and low maintenance costs. Thanks to the knives cut, work is not interrupted due to chain or flange change. Even in the most challenging conditions, the cutting blades last about 1000 operating hours. For maintenance, it is enough to sharpen the blades. Replacing blades at the end of their service life is very easy and quick thanks to bolt fastening.

The Moipu 310EFI energy head is designed for efficient energy wood harvesting when speed and reliability are needed. It can be used for small thinnings, cleaning roadsides and field edges, and removing scrub.

The Moipu 310EFI energy wood head you can cut, accumulate and load, without having to change the grapple between work phases. Blades on the delimbing knives and tilt enable vertical pruning.
​

​The Moipu 310EFI energy head is ideal for energy wood operations with dense brush, small trees and scrub. Fast and reliable knives cut the trunk of a tree up to 31 cm in diameter with a single cut and even larger bundles of light brush.

The Moipu 310EFI energy head is equipped with Multi Tree Handling pliers (MTH), which allow several tree trunks to be accumulated simultaneously in one handful. As a result, work is done faster and unnecessary back and forth movements - and therefore fuel costs - are reduced. Damage to standing trees can also be avoided by reducing movement.

​​Thanks to the strong tilt and MTH pliers that support the trees in an upright position, allow stable and controlled handling of bundles during thinning. The grapple is safe to use even in demanding places. The strong tilt and large opening of the delimbing blades also allow for efficient loading, so you can do all the necessary work steps with the same tool.

are you interested? contact us!

​+358 407696663

info​@moisioforest.com

Contact form

MORE WORKING HOURS FOR YOUR MACHINE

The Moipu 310EFI energy head is suitable for installation on forwarders. When you install the Moipu 310EFI head on your forwarder, you can increase its working hours even when it is not needed in a chain alongside the harvester.

A forwarder equipped with an energy wood head can handle many smaller tasks, such as small thinning and tidying up roadsides and field edges. The maintenance and transfer costs of a single machine will also remain moderate, making the prices of even small contracts competitive and profitable for the contractor.

​The great advantage of a multipurpose machine equipped with a energy head is its versatility, year-round work regardless of the size of the contract.

---

Moipu 310EFI energy head properties

• Electric free installation with grapple open and grapple closed hoses
• Light weight (460 kg), but still strong structure makes the head easy to handle.
• The well-built tilt frame makes it ideal for unloading the forwarder and feeding wood chippers.
• Efficient shear cuts 31 cm of soft wood.
• Equipped with Multi Tree Handling pliers (MTH); Accumulation capacity of 3-6 trees depending on the tree size
• Large opening (106 cm) of the grapple/knives helps to hold trees and makes loading efficient.
• Vertical pruning with the blades on the delimbing knives and tilt

GENUINELY SIMPLE INSTALLATION WITHOUT ELECTRICS

Moipu 310EFI (electric free installation) works without electrics! Electric free installation makes the 310EFI a universal tool. 

Electric free installation makes it simple and energy head can be installed on all machines with double-acting hydraulics. This makes the installation very easy. You only must attach the head to the rotator and connect grapple open and grapple close hoses to the side or bottom of the rotator. Now you are ready to work! 

​Thanks to the quick installation, the head can be switched from one machine to another in the middle of the job, and it is not tied to just one machine.

---

Moipu 310EFI energy wood head is easy to use

The use of the head is easy to operate. You only use two buttons: grapple open and grapple close. Logic in the hydraulic block makes sure that you feel as if you have always been using it.

Pressing grapple close -button makes the loading knives shut, the shear cuts and the head tilts down.
Pressing grapple open- button makes the loading knives open and the head tilt up.
​
Accumulation function is operated when you stop holding the grapple close button after the head has cut a tree. After this, open the loading knives with grapple open button and take the head to the next tree.

As if you had always used it.

---

technical data

Optimal tree size	3-25 cm
Delimbing knives open	106 mm
Delimbing tip to tip ​(delimbs by pulling the grabble along the trunk)	30 cm
Cutting diameter	31 cm
Frame height	62 cm
Accumulation open	70 cm
Weight	460 kg
Crane	70-140 kNm
Hydraulics	60-120 l/min
Minimum pressure	200 bar
Maximum pressure	250 bar

pictures & video

options

quick coupler 2.0

With Moipu Quick Coupler 2.0, you can switch between tools ​quickly and effortlessly - saving time for efficient work.

​READ MORE about Quick Coupler 2.0

see also

moipu 240EFI

With the Moipu 240 EFI energy head, you can prune, cut down, accumulate and load trees. ​The head is designed to be installed on large forwarders.

​READ MORE Moipu 240EFI energy head

our services

Do you need financing?

All our products are available with a flexible financing solution that makes investing easy and risk-free. Our product acts as collateral, so you do not need separate collateral.

​Ask for a quote and at the same time you will receive a tailor-made financing offer that suits your specific needs. Our partners are Siemens Financing and OP.

Installation and maintenance

With Moipu products, you won't be left alone. We always want to make sure that the head work as intended – reliably and efficiently. We are here to help if there are any problems. 

We also service our products proactively or if trouble occurs. Through us, you will receive installation, commissioning, adjustment and maintenance services so that you can focus on your work.

Request a quote today!

Are you interested in our product, need more information about our services or would you like to consult a financing opportunity?
​Send a message or call!

​
​Send us your inquiry:

​
​CALL OR EMAIL US

​​Petrus Moisio
+358 40 7696 663
​CEO, Sales

Micael Granlund
+358  40 163 0090
Area manager, Scandinavia

Taneli Moisio
+358 40 590 3131
Sales, service

​[email protected]
[email protected]