Efficient and easy-going moipu 315 EC
With the 315 EC head you can cut down, accumulate and load trees. Quick cutting combined with good multi-tree-handling (MTH) properties ensure high productivity. Shear cutting guarantees non-stop working without the need of constantly changing saw chains or bars. The 315 EC head is an effective solution for harvesting whole wood. With a 315 EC head, you can cut 31 cm of wood with a single cut! |
Plenty of properties
Thanks to the MTH arms, the work can be further accelerated by being able to more trees at once. The arms also support the trees from above, allowing the bundle to stay upright better and work more stable. With the help of strong tilt, you can maneuver bundles of trees and avoid damages to remaining trees.
|
Profitable harvesting
The Moipu 315 EC head is a very cost-effective head for energy wood thinnings. Even in the most challenging conditions, the cutting blades last about 1000 hours. The head is designed to withstand continuous and professional use. Compared to a traditional harvester head, the 315 EC head has very low operating costs. Low costs and low maintenance requirements ensure profitable energy harvesting.
Can be installed on harvesters, excavators and forwarders
The 315 EC can be installed on harvesters, excavators and medium-sized forwarders. The head needs a boom cable and a control system. You will need pressure and return lines for head installation. With a higher oil flow, you can get the most power out of the head.
Easiest is to install the head to harvesters, which already have hoses and control system ready. When you install the head to a harvester you will need original harvester head module.
When installing the head to an excavator, you will need to install pressure, return and overflow hydraulic lines to the boom. In addition to these, you will need also a protection hose for the electric cable. The excavator also needs a control system for the head. Moipu control system provides everything needed for the control of the head and installation.
Forwarder demands the most from the installation, but when the installation is made properly, you will get a really cost-efficient unit for small wood harvesting. Like in the excavator the forwarder needs hoses installed to the boom and a control system. In addition to these loading space should be altered for best outcome in thinnings. Bunks should be made sliding and guard screen tilting. With these alterations you can do forest roads reversing. When the road is finnished tilt the guard screen up and slide the bunks back and you are ready to fill up the loading space.
Easiest is to install the head to harvesters, which already have hoses and control system ready. When you install the head to a harvester you will need original harvester head module.
When installing the head to an excavator, you will need to install pressure, return and overflow hydraulic lines to the boom. In addition to these, you will need also a protection hose for the electric cable. The excavator also needs a control system for the head. Moipu control system provides everything needed for the control of the head and installation.
Forwarder demands the most from the installation, but when the installation is made properly, you will get a really cost-efficient unit for small wood harvesting. Like in the excavator the forwarder needs hoses installed to the boom and a control system. In addition to these loading space should be altered for best outcome in thinnings. Bunks should be made sliding and guard screen tilting. With these alterations you can do forest roads reversing. When the road is finnished tilt the guard screen up and slide the bunks back and you are ready to fill up the loading space.
technical data
Optimal tree size |
3-25 cm |
Delimbing knives open |
106 mm |
Delimbing tip to tip (delimbs by pulling the grabble along the trunk) |
30 cm |
Cutting diameter |
31 cm |
Frame height |
62 cm |
Weight |
485 kg |
Crane |
70-140 kNm |
Hydraulics |
160-220 l/min | 200-250 bar |
pictures & video
ASK more from our sales |